Parts & Accessories

Air-Liner GRAVEL is an insert for tubeless-ready gravel tires. Re-usable and very easy to install—as easy as mounting an inner tube on your tire—Air-Liner GRAVEL is compatible with tubeless-ready tires only and with 3-way valves (5-way valves are included for ultimate airflow). The insert can be used with sealant—preferably sealants without ammonia. - Air-Liner increases control, durability, performance, and protection of both tire and wheel. - Compatible with any wheel size up to 700c with 3-way tubeless valve, and tire widths from 31mm to 40mm. - The Vittoria Air-Liner is a tire insert, designed for use in tubeless tires. - Sold individually (single tire).

Vittoria's Mastik'One is a professional-grade tubular cement that has been trusted by the pros for decades. It provides excellent hold on both aluminum and carbon rims, and gives you the piece of mind that comes with knowing you're riding on the best. - Choose from 250-gram tin or 30-gram 12-pack - 30 grams is enough for one to two tires depending on surface area

The Surly Molenda tire is made for the Surly Moonlander bike. Designed to power your Moonlander over previously unridden terrain, this tire features a spacious 6.2” tread to keep you rolling over loose, unconsolidated debris, sand, and snow without a hitch. A deeply grooved tread spans the footprint for maximum flotation and traction when clambering over rocks, roots, logs, and anything else in its path.

The Surly TPU, or Thermoplastic Urethane, tube is a tough, airtight material lighter than traditional butyl innertubes. It is designed exclusively for the Surly Molenda tire, and allowed for a custom, oversized 6.2" width that maintains its structure, even when operating at low pressures. With the TPU tube installed, you can air down your Molenda tire to maximize contact patch for better flotation, traction, and overall performance.

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

The Next Level in Sealing Power from the People who Invented Tubeless Conversions If you've walked the mechanics' pits at any National or International level event, chances are you've seen them: trademark Stan's black quart bottles with no labels. Look closer and you might have seen strange symbols scrawled all over the bottles in a silver marker, letters and numbers, formula notes by the man himself, Stan Koziatek. For nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit, he developed a proprietary sealant formula with close to twice the amount of the standard sealing crystals plus special "XL" crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance. The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, the Race Sealant will clog injectors and smaller bottles almost immediately. Stan's has made Race Sealant available to riders everywhere, and it is only available by the quart. - First choice of riders around the world for tubeless conversion and flat prevention - Twice the amount of Stan's standard sealing crystals - "XL" crystals capable of sealing even larger punctures - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment

- Quick sealing and stop punctures up to 1/4 inch - Can be used year around - -09: Box of 12 bottles

A new and improved Tubeless Sealant Injector syringe supports the needs of modern tire sizes and the higher volume fill of sealant required, for a flat-free riding experience. The larger volume 150ml injector makes application of sealant simple, with no mess or waste of sealant. - Larger 150ml volume gives you the ability to inject sealant into today’s higher-volume mountain, gravel, and road tires with a single fill - New easy press-on adapter presses directly onto Presta and Schrader valve stems for quick fills without threading or additional parts - Patent pending top-fill, drip-free system features a cross-slit valve in the fitting paired with a unique air-relief channel in the injector body allows a precise fill of well-shaken sealant from the top for a convenient set-up with zero mess - Hose plug included for hanging on your workbench or mess-free storage in your toolbox

Use Ultimate Tubeless Sealant Replenisher to inject into your tires and keep your Ultimate Tubeless Sealant w/FiberFoam going for 12-18 months! - Effective down to 0F/ -18C - Compatible with sealant injectors - Comes with rubber hose for easy injection - When used every 90-120 days, can extend Ultimate Tubeless Sealant w/FIBERFOAM life to a year - Use Replenisher every 90-120 days for best performance - Made in the USA

Ultimate Tubeless Sealant uses FiberFoam technology to harness the power of carbon fiber to seal up to 7mm punctures without losing pressure. Get it while supplies last. - Effective down to 10F/ -12C - Seals 7.5mm holes for up to 6mo - Must be poured into tire during install - Not injector compatible (It seals holes bigger than your valve) - Use Replenisher every 90-120 days for best performance - 6, 9, and 12mm recycled carbon fibers are dispersed evenly by a foaming latex to create ultra strong seals - Made in the USA

"Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it. Made from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn’t widen the size of the hole already there. Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn’t have any issues gripping the tool, even in the muddiest of conditions. Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags. KEY FEATURES - Available in 12x Chris King colours - Quick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the fork - With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn’t widen the size of the - hole already there - Fork made from 316 stainless steel - Body made from anodised 6061 aluminium - Knurled body and ribbed lid / handle for extra grip - Weather sealing o-rings make the tool waterproof when assembled - Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs"

An easy to use dipstick that allows you to check the sealant level in your tires without having to pop the bead. With the valve positioned at 6 o'clock remove the valve core, insert the dipstick and read the sealant level

- A premium proprietary latex tire sealant formula featuring lightweight biodegradable ingredients; 119.6 grams for 4 ounces - Contains multiple shapes and sizes of solid particles called nanites which quickly seal holes up to 1/4 - Performs in varying

Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.

- The same tubeless valves, now with a Tire Insert air flow system - 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts - Upgraded to aircraft grade 7075 aluminum valve stem and cap - 4mm machined Allen Key slot for easy installation/removal - Valve core removal tool integrated into valve cap - Includes multiple rubber bases to optimize fit with multiple rim types

GUP quick fix tire sealant and inflator is a eco-friendly, latex-based formula that simultaneously inflates and seals punctured tires within seconds. Works with tubes, tubeless, and tubular. The 6-pack of GUP “kwiki’s” will allow you to share with friends, or just keep them for your own peace of mind. Purchase includes 2 Holsters!

- Latex-based formula which can simultaneously inflate and seal most common punctures quickly - Works with tubes, tubeless, and tubular tires - Proven to seal up to a 6mm puncture on tubeless tires, getting you back in the saddle faster - Enough pressure to seat a tubeless tire onto a rim - Comes with an easy-to-use hose adapter and both Schrader and Presta valve compatible threaded nozzles - Fills a 29 x 2.4 MTB tire up to about 29psi

Dynaplug Megaplugs are constructed from viscoelastic rubber impregnated cord and 6061 aluminum tip. - Compatible with: Megapill tool, Megaplugger tool, and the Racer tools - Specially designed to repair large punctures in tubeless bicycle tires - Approximately three times the thickness of a standard plug (approximately 7/32") - Pack of 3 replacement plugs - Made in USA

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 33mm to 46mm and inner rim widths 19mm to 26mm Includes - 1 CushCore Insert - 1 CushCore Tubeless Air Valve - Installation Instructions

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert, allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 1.8" to 2.4" and inner rim widths 22mm to 32mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 1.8" to 2.4" and inner rim widths 22mm to 32mm Includes - 1 CushCore Insert - 1 CushCore Tubeless Air Valve - Installation Instructions

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel

A comprehensive patch kit for all puncture sizes. - Contains 7 assorted patches, 1 metal buffer and 1 tube of rubber cement

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Sold in a pack of 100 - XL Stud features a larger carbide tip diameter for increased traction