Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Accessories/Parts

Yakima 8 Hole Chainstraps
$14.99
Chainstraps for a multitude of rear of car bike racks.
Yakima End Caps
$19.99
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Yakima MightyMount 32H
$59.99
These MightyMounts are simple attachments that make several gear-specific Yakima mounts compatible with Whispbar. - Simple snap-around adapter allows Yakima bike, boat and cargo accessories to be attached to Whispbar rack systems - Quick and easy installation and removal; no tools required - 32H fits onto Whispbar Flush, Through and RailBar rack systems - Allows the attachment of the following Yakima accessory mounts: HighRoller, Raptor, Mako Saddle, LandShark, KayakStacker, HullyRoller, HullRaiser, BasketCase and WheelFork - Sold as a set of 4 and uses the hardware provided with the accessory mount Product Specs: - Weight: 0.47 lbs. - Limited Lifetime Warranty
Thule EasyFold XXL Fatbike Strap
$29.95
A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks
Thule KIT1710
$139.99
Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.
Thule KIT1751
$139.99
Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.
Thule One-Key Lock Cylinders (6-pack)
$99.99
Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.
Thule Snug-Tite Receiver Lock
$79.95
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Swagman XTC 2/XTC 4 Fat Bike Wheel Holder
$44.99
Adapt your Swagman bike rack to accommodate fat bikes with wheel holders that fit extra-wide tires. - For use with Swagman's XTC 2 & XTC 4 bike racks - XTC 2 & XTC 4 Fat Bike Wheel Holder (set) 1 left, 1 right wheel holder
RockyMounts Brassknuckles Fattie Adapter
$32.99
Some of the best ideas are home grown in Colorado, and The Fattie is one of them. Easily convert your BrassKnuckles rack to fit your fat bike–the kit includes a larger wheel chock and 2 ratchet strap extenders.
Kuat Pivot v2 Swing Away Extension
$413.00
Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to. - Clearance for tailgates or rear doors - Proprietary FLATLOCK cam system - Locking hitch pin - Lifetime Warranty - 2” Hitch Only - Quick-release 90 or 120 degree swing away - Driver-Side or Passenger-Side Swing Options - Compatible with fully loaded 4-bike NV 2.0 - Load up to a maximum of 250lbs
Yakima 1-7/8-inch Trailer Coupler
$69.99
Coupler for 1-7/8 " balls for RACKandROLL trailer.
Yakima 2-inch Trailer Coupler
$69.99
Coupler for 2" balls for RACKandROLL trailer. Product Specs: - Weight: 4.12 lbs. - Dimensions: L 11.00 in x W 3.90 in x H 5.00 in - Limited One Year Warranty
Yakima BaseClip
$59.99 - $74.99
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima Boa Wheelstrap
$13.99
Rear wheel strap for Boa bike mount. Includes one strap.
Yakima Bolt TopLoader
$154.99
A permanently mounted bracket that allows 1A Raingutter Towers or Q Towers to be used in some situations where no raingutters exist. Installed with carriage bolts, washers, and lock nuts. - Stainless steel hardware included - If you are attempting to use QTowers and our bolt top loader for your vehicle you will need a pair of Q41 clips, sold separately. - Sold as pairs Product Specs: - Weight: 1.00 lbs. - Dimensions: L 7.10 in x W 2.50 in x H 0.75 in - Limited Lifetime Warranty
Yakima Bow/Stern Tiedowns
$64.99
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. They're also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
Yakima EXO GearTotes
$84.99
Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty
Yakima Fat Bike QR Locking Skewer
$64.99
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
Yakima Felt Pads (Sweetroll/ Hullhound)
$34.99
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
Yakima Joe Pro Safety/Wheel Straps
$9.99
Safety and wheel straps for Joe Pro series strap racks. Includes one each.
Yakima K323 Fitting Kit
$149.99
Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar
Yakima K328 Fitting Kit
$149.99
Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar
Yakima K450 Fitting Kit
$149.99
Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar
Yakima Landing Pad 21 (Set of Four)
$259.99
This low-profile custom-install solution delivers up to a 220-lb. load capacity. It's a great choice for most any naked roof vehicle with a roof ditch. Combine with SkyLine Towers and any Yakima crossbars to create a roof rack system ready for a wide selection of gear mounts, including a roof top tent. Product Details: - Permanent installation into the roof ditch for up to a 220-lb. load rating. - Designed for use with our SkyLine towers paired with any Yakima crossbar. - Yakima's patented Landing Pad design for quick and easy tower installation and removal. - Includes snap-on covers for when the rack is removed. - Choice of two pad shapes lets you create the perfect fit. - Stainless steel rivets for superior strength. - Includes four Landing Pads and necessary hardware (see instructions for required list of tools) - Vehicle must have compatible roof ditch for proper instillation (see instructions for fit parameters) - Some assembly required,10 minute install Product Specs: - Weight: 2.57 lbs - Dimensions: L 7.00in x W 2.00in x H 1.50in
Yakima Landing Pad 23
$149.99
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in
Yakima Landing Pad 25
$149.99
Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty
Yakima Landing Pad 28
$149.99
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2020+ Toyota Highlander. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 30 7/8" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed Product Specs: - Weight: 1.38 lbs.
Yakima LockNLoad Corner Bracket Kit
$129.99
Load up and secure bulky gear with this set of heavy-duty adjustable brackets for the LockNLoad platform rack. Designed to hold just about any hard-shelled container-including coolers, storage bins, or even a toolbox—these brackets provide peace of mind for carrying gear on any rugged adventure. The drop-in style T-slot eyebolts make them easy to install and adjust, and they pair well with Yakima Heavy-Duty Straps or other tie downs (sold separately). Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Secures hard-shelled containers up to 3' tall and 110 lbs./50 kg. - Heavy-duty stamped-steel construction, with a durable black-zinc coating. - Easily installs in minutes on the LockNLoad platform rack and most other T-slot equipped platforms. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Packaged as a set of 4 brackets, easily pairs with our Heavy-Duty Tie Down Straps (sold separately). Product Specs: - Weight: 5.00 lbs - Dimensions: L 4.50in x W 4.00in x H 3.75in - Some assembly required, 15 minute install
Yakima LockNLoad Perimeter Rail Kit B (for 60x54)
$379.99
Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 17.80 lbs - Dimensions: L 44.00in x W 1.50in x H 3.50in
Page 1 of 4 Next page