Promotions

Designed to hold socket to bottom bracket axle to prevent slippage during installation or removal. To be used with square tapered, Octalink and ISIS drive sockets in order to secure the tool to the BB during installation and removal.

Hub cone wrenches available in various sizes

Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Seca to any GoPro mounting option.

An easy to use dipstick that allows you to check the sealant level in your tires without having to pop the bead. With the valve positioned at 6 o'clock remove the valve core, insert the dipstick and read the sealant level

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

The Park FR-2 Freewheel Remover fits SunTour two-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel. (Not recommended for use with SunTour 4- and 6-notch freewheels.)

Dynaplug Megaplugs are constructed from viscoelastic rubber impregnated cord and 6061 aluminum tip. - Compatible with: Megapill tool, Megaplugger tool, and the Racer tools - Specially designed to repair large punctures in tubeless bicycle tires - Approximately three times the thickness of a standard plug (approximately 7/32") - Pack of 3 replacement plugs - Made in USA

- QR Locking Hitch Pin for Adams Trail-A-Bikes

The Stick-On Mount adheres to any flat and mildly contoured surface to provide a bar mount for your Light & Motion lighting system (sold separately). Works great for full-face helmets, paddleboards, kayaks, etc.

Origin-8's Flask Cage is the cage you need to carry your Origin-8 Flask (sold separately). It's made of durable and light aluminum to hold your Flask securely and keep it right at hand.

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

Luxurious EVA foam. - Excellent OEM replacement - With adhesive backing - 210 x 3cm - Black screw-in end plugs included - A whole spectrum of color options

The silk liner is naturally breathable and is known for fast drying. It is a great combination with wool gloves. Shell: Silk 60 g3 Palm: Silk 60 g3 and touch screen compatible fingers.

The sleek and ultralight BM-45 bar end mirror easily attaches to drop and flat bars, making it perfect for all bikes. Constructed of aluminum and glass for durability and nearly distortion-free viewing, the BM-45 represents the height of handlebar mirror construction and design. Minimal projection from the bar means never having to sacrifice clean aesthetics for critical rear-view safety again.

Stores tire levers, multitools, repair kits, money, and keys in a handy wrap that has an integrated credit card compartment and clear cellphone pocket with a loop for your pump. One for the jersey back pocket. KEY FEATURES - Credit card compartment - Exterior Pump loop

The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

Suitable for standard road bike tire widths of 23—32mm, Roadie is small, stylish, and perfect for the urban cyclist. The Roadie is small enough that it virtually disappears into the decor yet magically displays the ride you're so proud of. It is a lifestyle product that brings personality and design in an affordable package.

X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK cleats provide a 13° angle of disengagement and allow for unidirectional release only. - Compatibility: X-Track and Geo Trekking Collection, SPD compatible - Material: Premium Steel - Clip out direction: Lateral - Angle of Disengagement: 13° - Lateral Adjustment: 2mm - Angular Adjustment: 1° - Weight (pair): 45g

Add Selle Royal comfort to all of your rides with their Gel Seat Cover. Added on top of your bike's seat, it cushions and eliminates pressure with Selle Royal's RoyalGel and elevated textile patches. This cover fits most exercise bikes at the gym, too, so you can enjoy all your workouts.

We did our homework on this cog and we think you will be pleased with the result! This 16t cog smooths out the cog to cog transition when using our GC and a standard 10 speed 11-36 cassette. You should expect this to shift well and last as long as the rest of your cassette cogs of similar size. Here are the transitions WITHOUT the 16t cog (4 tooth max jump): - Remove the 15t -> 11-13-17-19.... - Remove the 17t -> 11-13-15-19... Here are the transitions WITH the 16t cog (3 tooth max jump): - Remove 15t & 17t-> 11-13-16-19... Compatibility: Shimano 10 speed cassettes - XT 11-36t (CS-M771) - XTR 11-36t (CS-M980) - Other 11-36t Shimano cassettes like SLX HG81 11-36t - Modification required (must drill out rivets holding the 17t to the larger cogs) SRAM 10 speed cassettes - PG 1030, 1050, and 1070 - 11-36 and 12-36 - X0 11-36t(XG - 1080) - Remove the 14t rather than the 17t

Capture your ride from new and exciting angles with GoPro's Head Strap Mount. It's incredibly adjustable and fits over some helmets or just over your head so you can mount your GoPro camera for unique shots (camera sold separately).

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) -Judy Gold and Silver (2018+)

- Fits all Yakima crossbars except 86-inch - Sold in sets of 4

- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting

The Shimano Tourney SL-TX30 is a thumb shifter for mountain bikes that features Shimano's Optical Gear Display, which tells riders what gear position is selected while riding. - Thumb shifters - Optical gear display - Includes SIS40 shift cable set

- The ATAC 13/17° cleat works with all TIME mountain pedals. - Included with all mountain pedal models numbered "6" and higher - Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe - Compatible with all two-hole cycling shoes.

- The ATAC EASY 10° cleat works with all TIME mountain pedals. - Included with mountain pedal models numbered "2" and "4." - Release angle of 10 degrees and is compatible with all two-hole cycling shoes. - Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.

Add a water bottle attachment to your Thule Chariot.

Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.

Alternator 2.0 is the latest iteration of Salsa's adjustable dropout system. Alternator 2.0 Dropouts are a modular system consisting of replaceable dropout plates and fixing hardware. They are specifically designed for, and only compatible with, Salsa frames using the 2.0 system. - Alternator 2.0 Dropout plates are compatible with frames featuring 142, 148, 177, or 197mm spacing - Hardware kits (sold separately) must always be paired with the style of dropout plates being installed on the frame - Allows for the rear axle location to be adjusted through a ~17mm range relative to the bottom bracket axle - Note: This part number only includes a single Alternator 2.0 plate

The Syncros Computer hanger provides perfect integration for your Garmin on the Syncros XR Stem. Simply replace the stem cap.

Replacement adapters for Jagwire Elite Bleed Kits - Features quarter-turn valves that make it easy to quickly open and close the bleed system - Red seals provide easy identification for use with mineral oil systems only

The Carve Gloves are designed for all-mountain bikers, freeriders, and racers. The ergonomic preformed slip-on gloves feature an abrasive synthetic palm and a stretch fabric top, enhancing fit and comfort. The captivity touch function enables the use of a touch screen and the reinforced finger tips increase safety and its lifespan. - Pre-formed Ergonomics - Slip-on Design - Stretch Top - Abrasive Synthetic Palm - Reinforced Finger Tips - Touch Screen Ready

Quick and easy bike storage. - Folds flush to wall when not in use - Fits all bike sizes - Includes mounting hardware

No sunscreen, no problem The sun is no match for the UV Sunstop Arm Cover. Unlike lotions that eventually wear off, this cover lets you enjoy long rides without the risk of harmful UV exposure. It features comfortable UPF 50+ fabric that blocks the sun and wicks moisture so you can enjoy your sunny day in the saddle. Product details - Comfortable Profila Cool fabrics under forearms ventilate body heat on warm rides - UPF 50+ sun protection - Soft gripper with silicon print offers a stay-put fit - Streamlined fit with anatomic left and right design conforms to your body's natural movements

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Boot Size Small (5 to 7) Medium (7 to 9) Large (9 to 11) X-Large (11 to 13) Waterproof/Breathable, high-top gaiters - for backcountry ski boots, leather hiking boots and plastic mountaineering boots. 3 Layer eVENT® ripstop nylon uppers, 1000D HDTEX polyester with lined cuff. Waterproof//Breathable uppers and waterproof PU coating on lower cuff. Heavy-duty, instep strap with nylon buckle. Ergonomic design and 2" wide Velcro closure at front allows for easy custom fitting. Web strap adjustment at top with quick-release buckle. Easy grab tabs and front bootlace hook.

Jagwire's Pro Internal Routing Tool simplifies routing through a frame, using powerful magnets to safely and easily guide cables, housing, and e-shift wires. - A retractable, flexible magnet can be inserted into the receiving end of an internal cable run to find the magnetic adapter and easily pull it through - Adapters for inner cables, hydraulic hose, and Di2 e-Tube wires are included - The adapters nest neatly inside tool body when not in use

Ultimate Tubeless Sealant uses FiberFoam technology to harness the power of carbon fiber to seal up to 7mm punctures without losing pressure. Get it while supplies last. - Effective down to 10F/ -12C - Seals 7.5mm holes for up to 6mo - Must be poured into tire during install - Not injector compatible (It seals holes bigger than your valve) - Use Replenisher every 90-120 days for best performance - 6, 9, and 12mm recycled carbon fibers are dispersed evenly by a foaming latex to create ultra strong seals - Made in the USA

Wald's 742 training wheels feature three slots on the brace arm allowing this wheel set to mount on most single speed bicycles with 16- to 26-inch wheels. The brace arms are designed to fit rear frames tubes up to .75 inches in diameter. This model is intended for use by riders weighing up to 125 pounds. - The Wald Training Wheels fit 16- to 26-inch bicycles. - The Wald Training Wheels support riders up to 125 pounds.

Adjustable to fit 16" - 24" bicycles - Ideal for kids bikes with derailleurs - Designed for NUTTED rear axles - Does not fit QR axles (note: QR axles can be changed to NUTTED style) - Includes threaded rear axle extender - 125lb weight capacity

For the Love of the Glove The Icon Race Glove was designed for the cyclist seeking all the benefits of wearing gloves but without any of the restrictions. Protection, grip, comfort and looks: check, check, check and check. You’ll never want to not wear gloves again. - Grip and protection in a minimalist glove for riders who don’t like gloves - 2-layer palm for protection, with added print for grip - Minimal seams with lightweight fabric for exceptional comfort - Engineered compression overlay for fit - Castelli Damping System (CDS) protects median nerve - 15°-35°C / 59°-95°F - Weight: 22g

There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.

- Telescoping design and protective loop allows different geometry bikes (i.e. women's and bmx bikes) to ride on hitch or strap rack arms - Adjust length (31" maximum) - For use on 1 bike

- Merino Wool Blend for warmth and moisture management - 7" cuff

Risor is a lightweight Merino wool blend glove designed to keep hands dry and warm in mild temperatures above 45 degrees F (7 degrees C). These wool bike gloves also serve as a superb liner for our Sturmfist gloves or Cobrafist and Draugenklaw pogies in extreme cold. - Double-face Merino wool-blend fabric puts merino against your skin for warmth, polyester on the outside for durability - Wear as a liner inside Sturmfist, inside pogies, or on its own in mild conditions - Silicone on palm for grip and durability with minimal bulk - Touchscreen compatible - conductive fabric on the index fingers of the gloves allows riders to use their phones without having to remove their gloves. - Extended cuffs allow for more sleeve overlap, creating a stronger barrier against the elements - Suggested temp range: 45°F+ (7°C+) - Imported - Shell Back and Cuff: 54% Polyester, 41% Wool, 5% Elastane - Palm: 93% Recycled Polyester, 7% Elastane, Exclusive of trims. - Machine wash cold. Only non-chlorine bleach when needed. Tumble dry low. Do not iron. Do not dry clean.

Proper alignment starts here Bontrager inForm BioDynamic insoles with Superfeet are engineered to harmonize the interface between body, shoe, and bike, giving you the complete foot support you need to ensure mile after mile of pain-free pedaling. Models are color-coded: - Red = Low Arch - Yellow = Mid Arch - Blue = High Arch - Engineered for unparalleled foot control, pedaling efficiency, and comfort - 3D Arch Pillar provides optimal arch support for improved knee alignment - Precision molded heel cup helps stabilize and align the foot - Footrest metatarsal pad helps reduce or eliminate hot foot - inForm BioDynamics—Optimizes natural movement for sustained, higher performance

MICHELIN's StarGrip tires have a fascinating history. MICHELIN engineers were charged with designing shoes that could “adhere even to a stainless steel plate with an oily surface.” The tire guys saw the shoe's tread and this tire was born. The tread features star-shaped ridges extending in all directions, and like the shoes, it cuts through water, snow and mud for an outstanding grip. The tire's compound is similar to those used for winter car tires, so it remains flexible in the cold to provide unrivaled traction on wet, slippery roads and trails. In addition, there's a high-density nylon layer beneath the tread for excellent puncture resistance. So regardless of the weather, you'll have tires that can handle the ride.

These MightyMounts are simple attachments that make several gear-specific Yakima mounts compatible with Whispbar. - Simple snap-around adapter allows Yakima bike, boat and cargo accessories to be attached to Whispbar rack systems - Quick and easy installation and removal; no tools required - 32H fits onto Whispbar Flush, Through and RailBar rack systems - Allows the attachment of the following Yakima accessory mounts: HighRoller, Raptor, Mako Saddle, LandShark, KayakStacker, HullyRoller, HullRaiser, BasketCase and WheelFork - Sold as a set of 4 and uses the hardware provided with the accessory mount Product Specs: - Weight: 0.47 lbs. - Limited Lifetime Warranty

Head, shoulders, knee warmers, and toes The Thermal Leg Warmers trap body heat and wick moisture to keep you warm and dry on cold days. Zippered leg openings make putting on and taking off a breeze, while the fleece lined interior adds unmatched next-to-skin comfort. Product details - Thermal fabric traps body heat and wicks moisture, keeping you warm and dry - Fabric is breathable, moisture-wicking, and fast-drying - Anatomic left and right design - Soft brushed interior provides next to skin comfort - Wide gripper band with silicone print provides a stay-put fit - Semi-auto locking ankle zippers make for easy on and off - Fitted cut provides streamlined body fit for enhanced performance Specifications - Temperature use (high): 70 deg. F - Temperature use (low): 45 deg. F - Fiber content: 86% Nylon / 14% Spandex - Material: Knit

Whether you're running in frigid temps or skiing in blustery winds, our Men's Merino Sport 250 Wind Boxer Brief helps keep you covered—comfortably. Our warmest Merino/poly-engineered material helps move sweat, dries quickly, and holds its shape during your highest-intensity activities. A windproof front panel provides increased protection as temps drop and minimal Merrow seam construction provides superior durability while keeping super-soft Merino next to skin. Grab a pair and make your first layer your favorite.

Memory foam comfort. Trek Velocis Dual Foam Cycling Glove is crafted from premium materials with strategically placed gel and memory foam padding that offers an excellent handlebar feel. This gel-padded bike glove gives you superior comfort, grip, and vibration control so you can pedal longer with confidence. Details: - A premium, high-performance gel and memory foam unisex bike glove that offers superior all-day comfort. - Gel and memory foam pads provide superior comfort and vibration control - Strategically placed dual-density pads allow for optimal pressure distribution - Unique pad design reduces bulk while providing a better connection to the bike - Textured faux suede palm delivers better grip and confidence - Soft back-of-hand fabric made from 100% recycled materials - Sleek pull-off feature on the middle and ring finger makes glove removal easy - Soft nose wipe on thumb - The raw-edge pull-on wrist opening provides a sleek fit without any bulk

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.

Keep it classy Extend the hidden hose on the Air Support HP Pro pump, and thread it onto your Presta valve for secure inflation of your road tires. Designed with a smaller volume chamber for higher-pressure tires, this premium pump allows you to quickly inflate tires up to 120 psi. Stow it in your jersey pocket, or use the included bracket to mount it under your bottle cage. Product details - Premium-quality with smaller volume chamber for higher pressure tires - Inflate to 120 psi (8.25 bar) with little effort - Extendable, hidden hose reduces stress at valve when pumping at higher pressures - Threaded head securely locks onto Presta valves - Compact design fits snugly inside jersey pocket - Mounting bracket fits easily under bottle cage

A pair of Electra's Townie Aluminum Fenders on your ride will let you pedal even in less-than-ideal conditions. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.

Trainer thru axle adapter for CycleOps Trainers. Fits most 142mm thru axles with 1.0 and 1.75 thread pitch. This kit consists of an axle, washers, and end caps with bolts for use with CycleOps Classic or Pro Series trainers. The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. PowerSync Trainers are not currently 29er compatible. Partial list of compatible bike frames: - Canyon - Trek - Specialized - Cannondale - Niner - Salsa - Giant Reign - Scott - Santa Cruz - Norco

- The SS and SS+ feature an all-new tread pattern consisting of a smoother, diamond pattern center with more aggressive side lugs. - This tread pattern allows the rider to keep speed going into corners and maintain control throughout any transition a gravel ride could present. - The GravelKing SS incorporates a supple 126 TPI casing with a nylon puncture resistant belt and Panaracer's proprietary ZSG (Zero Slip Grip) compound. - The SS+ uses the same build as the SS but adds a bead-to-bead layer of Panaracer's ProTite puncture material for even more protection against tread and sidewall cuts for those extra demanding courses or rides with sharp flint rock.

This Merino wool midweight sock is the perfect baselayer for Wolvhammer boots. The wool wicks moisture away from feet, keeping them warm and dry.? Wear them on their own on cold days, or layer them with our lightweight socks for a vapor barrier in deep cold.