Other

Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets

The Puget lever kits are compatible with all of our droppers, including the Cascade, Pine, Rainier, Bachelor, and Coast. These levers use a barrel nut for securing the cable and is universal with all mechanically actuated droppers from other brands. This kit includes the lever assembly, cables, housing, and barrel nut. - 1x Lever - Designed to be used with bikes using a single front chain ring, this is a "shifter style" lever. The lever contains a sealed bearing, has a standard band clamp handlebar mount and is also SRAM MatchMaker X compatible.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

Shimano Y8H298040 SM-BH59 Olive and connecting insert

Flat Mount Disc Caliper Bracket Bolts

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

Forged Alloy seat-clamp.

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

The same bearings found in Trek and Gary Fisher full suspension bikes. - Refer to dimensions for best compatibility - A heavy contact seal provides the best defense against the elements - Refer to Service Manual for assembly instructions and service - The same bearings used in our bike assembly for proven quality - Wheel bearings are not an approved substitute for full suspension bearings

Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit. Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders. - 210mm Dropper Post - adjustable down to 190mm - 180mm Dropper Post - adjustable down to 160mm - 150mm Dropper Post - adjustable down to 130mm - 120mm Dropper Post - adjustable down to 100mm

Upgrade or refresh your Bontrager wheels. - Sealed cartridge bearing for long life - LLH seals for the best combination of low resistance and durable sealing

Upgrade or refresh your Bontrager wheels. - Sealed cartridge bearing for long life - LLH seals for the best combination of low resistance and durable sealing

Forged Alloy seat-clamp with QR lever.

Forged Alloy seat-clamp. - Offset cut is safer to use with carbon posts

Trek proprietary suspension hardware. - Trek/Fisher full suspension rocker pivot suspension hardware - For specific compatibility concerns, please contact our Customer Service team

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction

- Made of forged aluminum - Quality chrome-plated bolt and superior finish - Black

Aeffect Crank Stopper Kit for Race Face Aeffect cranks slows and stops the crank for no-footed tricks.

- Forged aluminum seatpost clamp and quick release

- Forged aluminum seatpost clamp and quick release

Red eTap battery terminal cover

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

- Disc rotor lockrings to securely mount Center Lock rotors - Available for standard or oversize QR or thru-axle hubs

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction - Allows the installation of a straight steerer fork without changing out the headset lower