Chainstraps for a multitude of rear of car bike racks.
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
$239.99 - $259.99
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
$59.99 - $149.99
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
These MightyMounts are simple attachments that make several gear-specific Yakima mounts compatible with Whispbar. - Simple snap-around adapter allows Yakima bike, boat and cargo accessories to be attached to Whispbar rack systems - Quick and easy installation and removal; no tools required - 32H fits onto Whispbar Flush, Through and RailBar rack systems - Allows the attachment of the following Yakima accessory mounts: HighRoller, Raptor, Mako Saddle, LandShark, KayakStacker, HullyRoller, HullRaiser, BasketCase and WheelFork - Sold as a set of 4 and uses the hardware provided with the accessory mount Product Specs: - Weight: 0.47 lbs. - Limited Lifetime Warranty
$49.99 - $69.99
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Have an older Yakima mount but have aero or factory crossbars? No problem. This is the simple and economical way to adapt classic Yakima mounts to just about any size and shape crossbar. The Dynaflex padding to provide all the extra protection and grip you need. Come in sets of four. - Simple, economical way to attach classic RoundBar only Yakima mounts to your factory or aerodynamic roof rack system - Dynaflex padding provide protection and grip - Not compatible with classic Yakima fork-mounted bike carriers; - Sold in sets of 4 Product Specs: - Weight: 3.25 lbs. - Limited Lifetime Warrantyhttps://cdn.shopify.com/s/files/1/0266/3943/3776/products/1_5024962c-0820-4ae8-8909-d5ad194b535e_1024x1024.jpg
Thule's Accessory Strap Kit is a set of four rubberized, replaceable, ladder-style straps for use with many of Thule's bike racks and anti-sway cradles.
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
Thule’s EasyFold XT is a fully foldable, compact, and easy-to-use hitch-mounted bike rack for all types of bikes. - Easy mounting of bikes through detachable bike arms with lockable - Thule AcuTight torque limiter knobs that “click” when optimal torque is reached - Fully foldable for convenient mounting, handling, and storage - Wheel straps with adjustable pump buckles for fastening wheels. (Optional XXL Wheel Strap kit to fit longer wheelbases and tires up to 4.7") - High load capacity enabling transport of e-bikes and heavy mountain bikes - Easy trunk access even with bikes mounted, thanks to smart foot pedal tilt - Foldable bike loading ramp integrates into rack for convenient storage (included) - Large distance between wheel holders enabling transport of sturdy bikes with large wheel bases - Ergonomic transport of the bike rack thanks to the integrated carrying handles - Lock your bikes to the bike rack and your bike rack to the receiver (locks included) - Thule Snug-Tite receiver lock virtually eliminates hitch rack movement in receiver and locks the hitch rack to the vehicle
A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks
Protect both your bikes and your pick-up on your next adventure with heavy-duty, adjustable, padded protection. Features - Flexible padding adjusts across a wide range of tailgates and large handle opening provides backup camera visibility - Bikes remain securely in place with integrated bike separation and multiple-position strap anchors - Bikes and pick-up trucks are protected during transport with heavy-duty vinyl, adjustable padding - Gear can be stored securely, even while driving, due to the inside-facing mesh pockets Technical specifications - Dimensions: 59 x 16 x 2.75 inch - Weight: 6.5-pound
This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust resistant steel design. - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.
Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.
Thule's Load Bars are a rock solid rack solution that come in 4 different widths to fit a huge range of vehicles.
Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Super rugged platform carrier with frame free clamping security for all types of bikes. - Carrier easily folds when not in use and tilts away from vehicle for rear access due to the HitchSwitch lever - Secure bikes quickly without frame contact with the frame free ratcheting arm - Bike to bike interference is eliminated with fully adjustable bike mounts - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters - Includes STL (SnugTite Lock) for locking rack to receiver hitch - Carries 2 bikes - Carries up to 4 bikes with Thule T2 Classic Bike Add-on (sold separately, 2” receiver only)
This add-on to Thule's T2 Classic platform hitch rack allows 4 bike capacity (2"/50mm recievers only). - Secure bikes quickly without frame contact with the frame-free ratcheting arm - Bike-to-bike interference is eliminated with fully adjustable bike mounts - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters
Add a 2-inch receiver to your RV bumper with Swagman's RV Bumper Adapter. It's crafted from solid steel and fits on a 4 to 4.5-inch welded steel bumper.
Swagman's Traveler XC2 is ready for adventure! This platform-style rack holds two bikes and is incredibly easy to load. Simply place the wheels in the holders and slide the ratcheting arm down securely on the top tube of your bike. Then, strap the wheels in place with the included straps. The XC2 rack is made of steel for excellent stability and durability, has adjustable wheel holders to fit different bike types, and folds up when not in use.
Adapt your Swagman bike rack to accommodate fat bikes with wheel holders that fit extra-wide tires. - For use with Swagman's XTC 2 & XTC 4 bike racks - XTC 2 & XTC 4 Fat Bike Wheel Holder (set) 1 left, 1 right wheel holder
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
The only thing left to do is answer. No matter where the call beckons, the MTR can get you and your ride there. Designed with versatility at its core, the MTR (aka: modular tray rack) can transport a variety of bikes and can be easily customizable with add-on trays to bring your whole collection of shredders or ride-share with friends. Each MTR rack is built from American-made steel and aluminum for maximum durability. Roomy wheel trays swallow bike tires up to 5 inches wide for a stable hold, while dual-arm wheel holders keep bikes locked in position—and keep the paint chip-free. It’s all built on a rugged hitch-based foundation that can be tilted away, when fully loaded with bikes and without, for fast and easy vehicle access—because after all, those snacks aren’t going to pass themselves. Plus, the MTR’s nesting bike trays make for easy-on, easy-off loading. No more lifting bikes over the rack—simply flip the trays out of the way as needed to get you from parking lot to trailhead in record time. Product Features - Modular: carries 2 bikes, up to 60 lbs, and can be customized with Add-On to transport up to four bikes. - Pivot away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes, and never touch the bike's frame. - Full Tilt: tilting mechanism for easy hatch access. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Designed to be used with 2" hitch receivers only. - Tray-style hitch bike rack - Carries 2 bikes, up to 60 lb. each - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed - Rack folds up for compact storage when not in use. - Tool-free installation - Rack weight: 55 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches - Integrated locking cable secures bikes to the rack - Locking hitch pin secures rack to the car - Accommodates wheel bases up to 53 inches - 2" hitch compatible - Constructed from American-made aluminum and steel, and tested to outlive the elements
Customize Your Hauling Capacity No ride or trail is exactly alike—so why is your rack setup the same no matter what? Put the MTR’s "modular" moniker to use with the 2-bike Add-On. The 2-bike Add-On is made from the same rugged, American-made aluminum and steel, which are tested to outlive the elements. It’s compatible with both 1-bike and 2-bike models and lets you haul more bikes to fit the day’s adventure—and maybe bring some friends along for the ride. Product Features - Bike tray add-on for MTR 1-bike or 2-bike tray-style hitch rack. - Built with American-made aluminum and steel. - Nesting wheel trays speed up bike loading and unloading process. - Wheel trays and dual-arm wheel holders securely transport variety of bikes. - Hauls bikes up to 60 lb if used as first two trays closest to vehicle; or up to 35 lb if used as third or fourth tray. - Bike tray add-on for the MTR platform hitch rack. Compatible with both the 1-bike and 2-bike base. - Carries 2 bikes, up to 60 lb each when used in the first two positions closest to the vehicle. When used in positions furthest from the vehicle, trays can hold bikes up to 35 lb. - Minimal assembly required. - Rack weight: 50 lb. - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Integrated locking cable secures bikes to the rack. - Hitch compatibility will depend on MTR base unit. - Built and tested to outlive the elements.
Some of the best ideas are home grown in Colorado, and The Fattie is one of them. Easily convert your BrassKnuckles rack to fit your fat bike–the kit includes a larger wheel chock and 2 ratchet strap extenders.
The WestSlope 3 is a wallet-friendly, feature-filled and clean platform hitch rack. The big brother to the WestSlope, just with the capacity for an extra bike. The frame body is sloped to create a tiered mounting arrangement that eliminates handlebar interference between the bikes. By using a soft-touch wheel hook and a ratcheted swing arm, the WestSlope provides a secure fit with zero frame contact. - Carries 3 bikes, up to 40 lbs each - Tiered mounting eliminates handlebar interference between bikes - No contact with frame, secures bicycle by front wheel - Carries road tires up to 3.0” wide mountain bike tires, and diameters from 20” to 29” - Compatible with bicycles’ wheelbases from 34” to 48” - Folds flat against the vehicle, and tilts down 30 degrees to allow for hatch access - Fits 2” hitches only, with anti wobble bolt - Not for use with fender-equipped bicycles - Rack weight 43 lbs (Shipping weight 47 lbs) - WestSlope Lock Kit sold separately
Throw your tailgate cover on, cinch it down, load up the bikes and go. There is no easier way to head to the top. With 6 straps, the Large Camo Tailgate Cover can help shuttle your whole crew while protecting your bikes and pickup from dings and scratches. - Fits most full-size trucks - Premium padded tailgate protection - Flap for easy access to tailgate handle - Six webbing straps for attachment - Dimensions: 34L x 62W x 19H in / 86.4L x 157.5W x 48.3H cm
Throw your tailgate cover on, cinch it down, load up the bikes and go. There is no easier way to head to the top. With 5 straps, the Small Camo Tailgate Cover can help shuttle your whole crew while protecting your bikes and pickup from dings and scratches. - Fits most mid-size/compact trucks - Premium padded tailgate protection - Flap for easy access to tailgate handle - Five webbing straps for attachment - Dimensions: 33.5L x 54W x 16H in / 85.1L x 137.2W x 40.6H cm
Coupler for 1-7/8 " balls for RACKandROLL trailer.
Coupler for 2" balls for RACKandROLL trailer. Product Specs: - Weight: 4.12 lbs. - Dimensions: L 11.00 in x W 3.90 in x H 5.00 in - Limited One Year Warranty
Turn your 66" trailer into a 78" trailer. Widen your 66" wheel track and Crossbars by 13" with this kit. With 78" Crossbars you can carry wider loads, such as two 36-inch beam canoes or up to seven kayaks. - Upgrade your RACKandROLL 66" trailer to a 78" trailer - Comes with two 78" Crossmembers and two 78" Yakima Crossbars Product Specs: - Weight: 17.31 lbs. - Limited One Year Warranty
Whether you're going on a cross country family road trip or heading out for a bike-friendly weekend the BackRoad is your take-it-easy answer. With increased bike spacing, the BackRoad makes it easy to pack more bikes with a lot less hassle. Cradles and pads provide a snug and protected fit, while fully removable ZipStrips make loading a breeze. An SKS bike locking system is included to give you some peace of mind on your travels. Product Details - 7" spacing between bikes for easier loading - Soft cradle pads for added bike protection - Side to side cradle rotation for a better bike fit - Anti-sway cradles eliminate bike-to-bike contact - Mast tilts down for easy hatch access - Integrated SKS locking cable locks bikes to rack - ZipStrips secure bikes to the rack and are fully removable - Arms fold down when not in use - 37.5lb weight maximum per bike - Fits 1.25" and 2" hitch receiver - Integrated Yakima bottle opener - Carries up to 2 bikes. Also available in a 4 bike capacity - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. - Weight: 31.21 lbs. - Dimensions: L 44.00 in x W 12.00 in x H 16.00 in - Limited Lifetime Warranty
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Give your truck bed a permanent bike-mounting solution with this fork-style mount. In fact, this mount, with single-sided adjustment skewer for easy loading, can be installed anywhere you can put a couple bolts. Go ahead, get creative. - A "bolt anywhere" fork-style bike mount - Fits bikes with 9mm x 100mm front hubs - Corrosion-resistant anodized aluminum construction Product Specs: - Weight: 0.50 lbs. - Dimensions: L 4.00 in x W 1.50 in x H 1.87 in - Limited Lifetime Warranty
Rear wheel strap for Boa bike mount. Includes one strap.
A permanently mounted bracket that allows 1A Raingutter Towers or Q Towers to be used in some situations where no raingutters exist. Installed with carriage bolts, washers, and lock nuts. - Stainless steel hardware included - If you are attempting to use QTowers and our bolt top loader for your vehicle you will need a pair of Q41 clips, sold separately. - Sold as pairs Product Specs: - Weight: 1.00 lbs. - Dimensions: L 7.10 in x W 2.50 in x H 0.75 in - Limited Lifetime Warranty
Keep your mind on the water and not on the safety of your boat. Top-of-the-line keeps your boat comfy, and when not in use, folds down for better aerodynamics and roof clearance. Universal mounts fit most crossbars out of box. - Folds when not in use for better aerodynamics - Tool-free installation - Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hull guard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Heavy-Duty Straps and Bow and Stern Tie-Downs included (HoodAnchor, sold separately, is required for vehicles with no attachment points for Bow and Stern Tie-Downs) - Integrated bottle opener - SKS Locks sold separately - Supports one boat up to 80 lbs Product Specs: - Weight: 15.20 lbs. - Dimensions: L 10.50 in x W 5.50 in x H 21.00 in - Minimum Crossbar Spread 24.00in - Limited Lifetime Warranty
Sun's out, power's on. The CBX Solar blends clean-lined, modern aesthetics with a first-of-its-kind integrated solar panel. We teamed up with Sunflare to create a solar panel capable of delivering a 36W/5-volt output for when you're adventuring off the grid. With 2 USB ports, it provides enough juice for a small campsite, won't drain power from your vehicle, and can charge phones, tablets, camping lanterns, and action cameras. An integrated, easy-grab lid handle locks gear inside, and the removable torque tool stows away to free up all available space for your gear. Product Details - Integrated solar panel is heavy-duty to withstand the elements - Interior converter features two USB ports for charging devices - Produces 36 Watts/5-volts, Perfect for charging things like portable batteries, cell phones, and camping lanterns - 16 cubic feet of cargo space - Rugged angular finish and stealth-like texture stands out from the crowd - Removable torque-limiting knob ensures a safe and secure installation - Intuitive and easy to grab lid handle locks gear inside the box and the box to the vehicle - Market-leading internal usable space with an unobstructed flattened floor provides more space for your gear - Optimized hatch clearance for better vehicle fit - Internal lid stiffeners for durability and easy open and close - Dual-sided opening for easy access on either side of your vehicle - Hauls gear for up to 3 campers; fits snowboards and skis up to 185cm - Integrated interior tie-down points - SKS Locks included for added security - Black chrome badging - Made in the USA Product Specs - Weight: 60.00 lbs. - Dimensions: L 83.00 in x W 38.00 in x H 14.00 in - Minimum Crossbar Spread 24.00in - Maximum Crossbar Spread 35.50in - Limited Lifetime Warranty
$119.99 - $149.99
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Weather resistant storage space that attaches quickly and easily to most vehicles, with or without roof racks. - Adds an additional 16 cubic ft. of storage.
Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty
Getting your skis and boards to the slopes has never been easier with the new EXO SnowBank. Pair it with an EXO GearLocker and you have customizable storage for everything you need. Carry up to five pairs of skis or four snowboards on the back of your vehicle—enough for your entire crew. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Carries 5 pairs of skis or 4 snowboards - DoubleJoint hinge expands for easy use with thick skis and boards - Large button makes it easy to open with gloves or mittens on - Tool-free, locking SpeedKnobs attach and lock EXO SnowBank to EXO SwingBase or EXO TopShelf - Use SKS Locks included with EXO SwingBase or EXO TopShelf to lock skis and snowboards - Fits skis up to 185cm long on most standard width vehicles - Limited Lifetime Warranty - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 13.25 lbs. - Dimensions: L 21.50 in x W 32.00 in x H 4.50 in - Limited Lifetime Warranty
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
The FatCat EVO is our sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry four pairs of powder skis—up to 136mm at the tip—or two snowboards. FatCat EVO mounts tool-free on virtually any roof rack. SKS locks are built in for added security. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super-sleek setup (sold separately). - Easily carries four pair of skis—up to 136 mm wide at the tip—or two snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - Large button makes it easy to open with gloves or mittens on - Sleek mirror-black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars—just add our SmarT-Slot Kit 2 (sold separately) Product Specs: - Weight: 10.00 lbs. - Dimensions: L 30.50 in x W 3.75 in x H 5.25 in - Minimum Crossbar Spread 12.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
The FatCat EVO is our sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry six pairs of powder skis—up to 136mm at the tip—or four snowboards. FatCat EVO mounts tool-free on virtually any roof rack. The OverHang clamp attachment point makes it easier to reach your skis or boards. SKS locks are built in for added security, and the mirror black finish looks awesome on your roof. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super-sleek setup (sold separately). - Easily carries six pair of skis—up to 136 mm wide at the tip—or four snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - For easier access to skis and snowboards, the OverHang clamp-mounting position shifts the mount further out on your vehicle's roof rack - Large button makes it easy to open with gloves or mittens on - Sleek mirror-black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars—just add our SmarT-Slot Kit 2 (sold separately) Product Specs: - Weight: 12.75 lbs. - Dimensions: L 40.50 in x W 3.75 in x H 5.25 in - Minimum Crossbar Spread 12.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
The Yakima FlushBar has a signature look that seamlessly integrates with the shape of your modern vehicle. This crossbar with integrated towers has no bar overhang, so your vehicle will look like it came from the factory with FlushBars already installed. The FlushBar shape maximizes strength, while minimizing drag and reducing noise levels to nearly zero. It accepts almost all Yakima mounts and cargo boxes for adaptable, multi-sport versatility. A complete system consists of two FlushBars and a Yakima Fitting Kit. Please consult www.yakima.com to determine which Yakima Fitting Kit and which FlushBar sizes are required for your specific vehicle. Product Details: - Tower is integrated with the crossbar for a sleek, seamless appearance - WindRidge on the leading edge of the crossbar reduces noise and decreases drag - JetTruss internal support engineering adds serious strength for minimal weight - Patented SmartFill technology allows for easy install of T-slot style mounts, such as the Yakima HighSpeed with SmarT-Slot Kit 1 - Compatible with almost all Yakima mounts and cargo boxes. Consult Yakima's Fit My Vehicle Guide for a detailed list. - Anchors to your rooftop with vehicle specific Yakima fitting kits (sold separately). Consult Yakima's Fit My Vehicle Guide to determine which Yakima Fitting Kit is required for your vehicle. - Easily locks to your vehicle with Yakima's SKS system (sold separately)
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty
The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
NEW! Perfect for family weekends or ditching work on a powder day, FreshTrack 4 is made for loading up and finding first tracks. Wide enough for a couple of boards or four pairs of skis, simple to mount on virtually any roof rack, no tools needed, and super easy to use, it's great for fresh powder and blue groomers. One-button access allows gloves-on operation, and the built-in SKS locks secure your gear. Product Details - Easily carries four pairs of skis up to 120mm wide at the tip or two snowboards - Tool-free clamp design makes install and removal a breeze - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Includes SkiLift attachment to provide clearance for tall bindings - Integrated SKS (Same Key System) locks included for added security Product Specs - Weight: 7.94 lbs - Dimensions: L 25.25" x W 5.75" x H 7.25" Installation Details - Some assembly required - Tool-Free Install - 25 minute install
NEW! Blue groomers and fresh powder, the FreshTrack 6 is the perfect mount for loading the crew and finding first tracks. Wide enough for four boards or six pairs of skis, simple to mount on virtually any roof rack, no tools needed, and super easy to use, it's great for quick getaways and dawn patrol starts. One-button access allows gloves-on operation, and the built-in SKS locks secure your gear. Product Details - Easily carries six pairs of skis up to 120mm wide at the tip - or four snowboards - Tool-free clamp design makes install and removal a breeze - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Includes SkiLift attachment to provide clearance for tall bindings - Integrated SKS (Same Key System) locks included for added security Product Specs - Weight: 9.90 lbs - Dimensions: L 35.00" x W 5.75" x H 7.25" Installation Details - Some Assembly Required - Tool-Free Install - 25 Minute Install
$139.00 - $244.99
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck’s tailgate while the soft felt backing keeps your truck’s paint protected. Integrated SitTight bike cradles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - Tailgate pad for your truck that securely carries your bikes to the trailhead - NEW Cushioned SitTight cradles protect bikes from shifting and sliding - NEW HindSight cover tucks out of the way so your back-up camera can do its job - NEW Velcro cradle closure system is easy on carbon bike frames and painted surfaces - Rugged nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your truck’s paint job - Integrated strap management system keeps the pad tight and secure on the way up the mountain - Medium size has a 5 bike capacity and fits mid-size & some older full-size trucks - Large size has a 6 bike capacity and fits most full-size trucks - Medium Dimensions: 53-inch Long x 5-inch Wide x 17-inch Tall - Large Dimensions: 62-inch Long x 7-inch Wide x 20-inch Tall
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups Dimensions: - Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in - Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in - Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in - X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.
Super simple and built to last, the new Yakima HangOut 2 offers grab-and-go bike carrying convenience for almost any vehicle. The adjustable strap system and QuickTrigger hub make installation easy, and the padded feet and coated metal buckles protect your vehicle’s paint. Integrated StableCradles secure your bikes for a confident carry and make loading and unloading a piece of cake. When you aren’t off adventuring, the HangOut folds flat for compact storage. - QuickTrigger hub system makes install easy and fast - Integrated StableCradles hold bikes firmly in place - Padded feet and coated metal buckles protect your vehicle - Arms fold for compact storage - Number of Bikes: 2 TECHNICAL SPECS - Weight: 16.00 lbs - Dimensions: L 27.50” x W 21.50” x H 11.25”
Super simple and built to last, the new HangOut 3offers grab-and-go bike carrying convenience for almost any vehicle. The adjustable strap system and QuickTrigger hub make installation easy, and the padded feet and coated metal buckles protect your vehicle’s paint. Integrated StableCradles secure your bikes for a confident carry and make loading and unloading a piece of cake. When you aren’t off adventuring, the HangOut folds flat for compact storage. - QuickTrigger hub system makes install easy and fast - Integrated StableCradles hold bikes firmly in place - Padded feet and coated metal buckles protect your vehicle - Available in two or three bike carrying capacities - Arms fold for compact storage - Number of Bikes: 3 TECHNICAL SPECS - Weight: 16.00 lbs - Dimensions: L 27.50” x W 21.50” x H 11.25”
Page 1 of 4 Next page