$7.99 - $11.99
Torx Wrench sizes: #1: Torx T25, T30, T40 #2: Torx T10, T25, T30 TB-2638: Torx T25, T30, T40
6" Diagonal cutting nippers
$12.99 - $14.99
TB-1065: For Shimano® cartridge B.B. & ISIS drive compatible. Use with 1/2” Dr. driver and 24mm wrench. TB-1065 can be turned with TB-8830. TB-1075: For Shimano® & lSlS drive compatible. Use with 1/2” Dr. air driver.
For Shimano and Truvativ cranks. Use with a 6mm hex key.
- For Shimano HG Cassettes - Use with 24mm and 19mm wrench or 1/2" ratchet wrench
$5.99 - $9.99
Hub cone wrenches available in various sizes
15mm Pedal Wrench
Remove BB86, BB90 bearings
- 4-in-1 cable cutter - Cuts cables and housing - Crimps cable ends - Crimps housing end caps
- For use with most Shimano hubs - Use with 24mm wrench or 1/2" Dr. wrench
- For use with splined 20-tooth BBs - Extra-long handle for better leverage for those stubborn BBs
1/2" Dr. bit socket H10 for Campagnolo® B.B. 10mm bolt
Designed for riders and home mechanics, it is an ideal and durable tool set. 1-Freewheel turner 1-15mm pedal wrench 1-Freewheel remover for Shimano® and other cassetees lockrings, W/center pin 1-Spoke wrench for 0.127" nipple (black) 1-Spoke wrench for 0.130" nipple (green) 1-Spoke wrench for 0.136" nipple (red) 1-Mavic® spoke wrench (yellow) 2-Phillips 2, Slotted 6 screwdriver 3-Tire levers 9-T/L handle hex set, size:2/2.5/3/4/5/6/8/10mm,Torx® 25
Hex Key Wrench available in two sizes: 2/2.5/3mm and 4/5/6mm
7" long combination pliers.
For English taps: 1.370” x 24 TPI right hand thread 1.370” x 24 TPI left hand thread - Used for tapping the threads in the bottom bracket shell of a frame.
- Specialy designed tools to safely remove/install crank bearings without using a hammer
Replacement pins for Super B chain tools.
Used to ensure disc brakes are properly mounted.
- Determines if dropouts are aligned and parallel to avoid bent axles or skewers - Long handles and comfortable grips provide you superior leverage for straightening any issue
TB-1901: 3mm x 0.5, for rear wheel drop-out alignment screws TB-1902: 5mm x 0.8, for water bottle, toe clip, fender and rack bosses TB-1903: 6mm x 1.0, for cantilever brakes and large fender bosses TB-1904: 10mm x 1.0, for derailleur hanger
-10, 8, and 6mm L-shaped hex wrenches for high-torque applications - Comfortable rubber grips - High-quality steel
- Guides a hacksaw to cut airfoil shaped seat posts up to 68mm or round tubes from 1" to 1.375" in diameter
- L-handled Allen wrenches - Comfortable, ergonomic grips - High-quality steel construction - Available in 2.5, 2, 3, 4, 5, 6, 8, and 10mm sizes
Set of 2 tire levers.
Professional hub cone wrenches available in multiple sizes.
- High grade steel screwdriver - Ergonomically-designed grip
- For use with Shimano SM-BB9000 and SM-BB93 outboard BBs
Various spoke wrenches for differing spoke sizes and companies.
T-Shaped wrench with Torx 30/5mm hex
Page 1 of 2 Next page